COSMOTHENE® G810-S

About
COSMOTHENE® G810-S is a Low Density Polyethylene product. It can be processed by injection molding and is available in Asia Pacific. Characteristics include: Good Flexibility Good Processability High ESCR (Stress Crack Resistant)&&

Product Description
Supplier	TPC
Generic	LDPE
Material Status	Commercial: Active
Features	Good flexibility,High ESCR,Excellent Processability
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
	0.918	g/cm³	ASTM D792
	35	g/10min	ASTM D1238

Nominal value	Unit	Test method

9.81	MPa	ASTM D638

600	%	ASTM D638

157	MPa	ASTM D747

THERMAL	Nominal value	Unit	Test method
	105	℃

Process Conditions
Injection Molding	Nominal value	Unit	Test method
Melt Temperature	170 to 200	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.