| About |
|---|
| COSMOTHENE® L705 is a Low Density Polyethylene product. It can be processed by extrusion coating and is available in Asia Pacific. Typical application: Coating Applications. Characteristics include: Good Adhesion Good Processability Good Sealability&& |
| Product Description | |
|---|---|
| Supplier | TPC |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good heat sealing,Low shrinkage,Good bond |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.918 | g/cm³ | ASTM D792 |
| Melt Flow Rate | 7.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 13.7 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 550 | % | ASTM D638 |
| Bending modulus | |||
| 23℃ | 216 | MPa | ASTM D747 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 105 | ℃ |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 300 to 320 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |