| About |
|---|
| 10% Glass Reinforced, Flame Retardant, ToughenedPolybutylene Terephthalate&& |
| Product Description | |
|---|---|
| Supplier | DuPont |
| Generic | polybutylene terephthalate |
| Material Status | Commercial: Active |
| Features | V-0 |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Tensile modulus | 3900 | MPa | ISO 527-2 |
| tensile strength | |||
| fracture | 70.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 4.7 | % | ISO 527-2 |
| Tensile creep modulus | ISO 899-1 | ||
| 1 hr | 3000 | MPa | |
| 1000 hr | 2000 | MPa | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30℃ | 5.0 | kJ/m² | |
| 23℃ | 8.5 | kJ/m² | |
| Charpy Unnotch Impact strength | ISO 179/1eU | ||
| -30℃ | 40 | kJ/m² | |
| 23℃ | 46 | kJ/m² |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 170 | ℃ | ISO 75-2/A |
| 8.0 MPa, unannealed | 66.0 | ℃ | ISO 75-2/C |
| Vicat Softening Temp | |||
| B50 | 180 | ℃ | ISO 306 |
| Melting temperature | 205 | ℃ | ISO 11357-3 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 1.0E+14 | ohms | IEC 60093 |
| Volume resistivity | > 1.0E+15 | ohms·cm | IEC 60093 |
| Dielectric strength | 27 | kV/mm | IEC 60243-1 |
| Relative permittivity | IEC 60250 | ||
| 100 Hz | 4.00 | ||
| 1 MHz | 3.80 | ||
| Dissipation factor | IEC 60250 | ||
| 100 Hz | 0.010 | ||
| 1 MHz | 0.018 | ||
| Compared to the leakage tracing index | 250 | V | IEC 60112 |
| Flammability level | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 0.75 mm | V-0 | ||
| Extreme oxygen index | 30 | % | ISO 4589-2 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.54 | g/cm³ | ISO 1183 |
| Shrinkage rate | ISO 294-4 | ||
| TD | 1.2 | % | |
| MD | 0.70 | % | |
| Water absorption rate | ISO 62 | ||
| 23℃，24hr，2.00 mm | 0.35 | % | |
| Equilibrium, 23 ℃, 50% RH, 2.00 mm | 0.15 | % | |
| Melt density | 1.31 | g/cm³ | |
| Apparent viscosity of melt | |||
| 250℃，1000 sec^-1 | 240 | Pa·s | ISO 11443 |
| Specific Heat Capacity of Melt | 1970 | J/kg/℃ | |
| Thermal Conductivity of Melt | 0.23 | W/m/K |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |