| About |
|---|
| ABS, powder, highest impact.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | ABS |
| Material Status | Commercial: Active |
| Features | Good flexibility,High impact resistance,Machinable,Good wear resistance,Solvent resistance,low-temperature impact resistance |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | |||
| — | 0.948 | g/cm³ | ASTM D792 |
| — | 0.960 | g/cm³ | ISO 1183 |
| Apparent density | 0.25 | g/cm³ | ASTM D1895 |
| BD | 70 | % | Internal Method |
| Average particle size | 200.0 | µm | Internal Method |
| Total NA Volatiles | 0.20 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 40 | ASTM D2240 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Molded |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |