CYCOLOY™ C1000HF resin

About
高流动性PC + ABS

Product Description
Supplier	SABIC
Generic	PC+ABS
Material Status	Commercial: Active
Features	High liquidity
Availabilitys	North America

Technical Data
MECHANICAL	Nominal value	Unit	Test method
tensile strength
Yield, 50 mm/min	59	MPa	ASTM D638
Tensile strain
Yield, 50 mm/min	5	%	ASTM D638
Fracture, 50 mm/min	80	%	ASTM D638
Tensile modulus
50 mm/min	2530	MPa	ASTM D638
bending strength
Yield, 1.30 mm/min, 50 mm span	92	MPa	ASTM D790
Bending modulus
1.3 mm/min，50mm跨距	2530	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	540	J/m	ASTM D256
-30℃	100	J/m	ASTM D256
Total energy of instrument impact
23℃	56	J	ASTM D 3763
-30℃	42	J	ASTM D 3763

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed
3.2mm	115	℃	ASTM D 648
6.4mm	98	℃	ASTM D 648
Linear coefficient of thermal expansion
MD：-40~40℃	7.2E-05	1/℃	ASTM E 831
Thermal conductivity coefficient	0.2	W/m/℃	ASTM C 177

PHYSICAL	Nominal value	Unit	Test method
Density	1.12		ASTM D792
Shrinkage rate
MD：3.2 mm	0.5- 0.7	%	Internal Method
TD：3.2 mm	0.5- 0.7	%	Internal Method
Melt Flow Rate
260℃，3.80kg	7	g/10min	ASTM D1238
260℃，5.0kg	24	g/10min	ASTM D1238
Water absorption rate
Equilibrium, 23 ℃	0.4	%	ASTM D570
24hr	0.1	%	ASTM D570

Process Conditions
injection molding	Nominal value	Unit	Test method
Drying temperature	95 – 105	°C
Drying time	3 – 4	hrs
Drying time (cumulative)	8	hrs
Maximum water content	0.02	%
Melt temperature	260 – 290	°C
Nozzle temperature	260 – 290	°C
Front Section Zone 3 Temperature	255 – 290	°C
Temperature in Zone 2 of the middle section	255 – 290	°C
Temperature in Zone 1 of the rear section	250 – 280	°C
Hopper temperature	60 – 80	°C
Mold temperature	60 – 90	°C
Back pressure	0.3 – 0.7	MPa
Screw speed	40 – 70	rpm
Shoot to cylinder size	30 – 80	%
Depth of exhaust groove	0.038 – 0.076	mm

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.