CYCOLOY™ CM4219 Resin

About
CYCOLOY™ CM4219 一种用于注射成型的15%的玻璃增强PC +ABS

Product Description
Supplier	SABIC
Generic	PC+ABS
Material Status	Commercial: Active
Features	Glass fiber reinforced
Availabilitys	Africa & Middle East ,Asia Pacific,Europe

Technical Data
MECHANICAL	Nominal value	Unit	Test method
tensile strength
Yield, 5 mm/min	103	MPa	ISO 527

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	90	J/m	ASTM D256
23℃，80104	9	kJ/m²	ISO 180-1A
Notched impact strength of cantilever beam
23℃	570	J/m	ASTM D 4812
23℃，80104	36	kJ/m²	ISO 180/1U

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	99	℃	ASTM D1525

PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
260℃，2.16kg	17	g/10min

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.50 mm	V-1		UL 94

Process Conditions
injection molding	Nominal value	Unit	Test method
Drying temperature	75 – 80	°C
Drying time	2 – 4	hrs
Melt temperature	230 – 270	°C
Nozzle temperature	220 – 260	°C
Front Section Zone 3 Temperature	230 – 270	°C
Temperature in Zone 2 of the middle section	220 – 260	°C
Temperature in Zone 1 of the rear section	200 – 230	°C
Mold temperature	50 – 70	°C
Hopper temperature	60 – 80	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.