CYCOLOY™ MC5215 resin

About
CYCOLOY™ C5215是一种15%的玻璃纤维增强PC + ABS混合树脂，用于注射成型。

Product Description
Supplier	SABIC
Generic	PC+ABS
Material Status	Commercial: Active
Features	Glass fiber reinforced
Availabilitys	Africa & Middle East ,Asia Pacific,Europe

Technical Data
MECHANICAL	Nominal value	Unit	Test method
tensile strength
Fracture, 5 mm/min	86	MPa	ISO 527
Tensile strain
Fracture, 5 mm/min	2.5	%	ISO 527
Tensile modulus
1 mm/min	5910	MPa	ISO 527
bending strength
Yield, 2 mm/min	134	MPa	ISO 178
Bending modulus
2 mm/mim	4970	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	70	J/m	ASTM D256
Notched impact strength of cantilever beam
23℃，80103	32	kJ/m²	ISO 180/1U
-30℃，80103	7	kJ/m²	ISO 180/1U

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed, 3.2 mm	95	℃	ASTM D648
Vicat Softening Temp	100		ISO 306

PHYSICAL	Nominal value	Unit	Test method
Density	1.29	g/cm³	ASTM D792
Water absorption rate
Saturation, 23 ℃	0.15	%	ISO 62
Melt Flow Rate
260℃，2.16kg	20	g/10min	ASTM D1238
Melt Volume Rate
260℃，2.16 kg	17	cm³/10min	ISO 1133

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
94v-1 flame level assessment	1.5	mm	UL 94

Process Conditions
injection molding	Nominal value	Unit	Test method
Drying temperature	80 – 90	°C
Drying time	3 – 4	hrs
Maximum water content	0.01	%
Melt temperature	250 – 280	°C
Nozzle temperature	250 – 280	°C
Front Section Zone 3 Temperature	250 – 280	°C
Temperature in Zone 2 of the middle section	240 – 280	°C
Temperature in Zone 1 of the rear section	230 – 270	°C
Mold temperature	80 – 100	°C
Back pressure	3 – 9	MPa
Screw speed	30 – 150	rpm

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.