| About |
|---|
| Cycoloy * RCY6214树脂是一种可注塑的PC / ABS混合物，具有非溴化和非氯化阻燃剂。 它含有35％的消费后回收物含量，UL-94 V0等级为1.5毫米。 专为需要平衡流量和冲击性能的各种应用而开发。 有限的可用性和受限的颜色。 |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | PC+ABS |
| Material Status | Commercial: Active |
| Features | Flame Characteristics |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.18 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 260℃，2.16kg | 21 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD：3.2 mm | 0.40~0.60 | % | |
| TD：3.2 mm | 0.40~0.60 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2500 | MPa | ASTM D638 |
| tensile strength | |||
| yield | 60 | MPa | ASTM D638 |
| fracture | 47 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 4 | % | ASTM D638 |
| fracture | 40 | % | ASTM D638 |
| Bending modulus | 2400 | MPa | ASTM D790 |
| bending strength | 90 | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 51 | kJ/m² | ISO 180-1A |
| Total energy of falling hammer | 50 | J | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa，6.4 mm | 101 | ℃ | ASTM D648 |
| 1.8 MPa，3.2 mm | 85 | ℃ | ASTM D648 |
| 1.8 MPa，6.4 mm | 92 | ℃ | ASTM D648 |
| Vicat Softening Temp | 100 | ℃ | ASTM D1525 10 |
| Linear coefficient of thermal expansion | |||
| MD：-40~60℃ | 71 | µm/m-℃ | ASTM E831 |
| TD：-40~60℃ | 72 | µm/m-℃ | ASTM E831 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.20 mm | V-1 | UL 94 | |
| 1.50 mm | V-0 | UL 94 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |