CYCOM® 2237 - SOLIAO

About
CYCOM® 2237 is Cytec Engineered Materials’ version of PMR-15. It is formulated for high temperature applications where low void content is critical. CYCOM 2237 has the best overall balance of processing behavior, thermo-oxidative stability and retention of properties in the 500 to 550°F (260 to 288°C) range. CYCOM 2237’s thermo-oxidative stability and micro-crack resistance make it ideal for jet engine and other fatigue loaded components like bypass ducts, gear box covers, transmission housings, vent tubes, fan stator and vane assemblies, nozzle flaps, core cowls, particle separator swirl frames and compression molded bearings. CYCOM 2237 prepreg can be autoclave cured, vacuum bag processed or compression molded. CYCOM 2237 is solution impregnated on a variety of fibers and fabrics. It is currently available on glass, quartz and graphite reinforcement. Product forms are unidirectional tape, non-woven mate and woven fabrics. Generally available widths are 12 inches for UD tape, 24 inches for mat and 60 inches for woven fabrics.&&

About

CYCOM® 2237 is Cytec Engineered Materials’ version of PMR-15. It is formulated for high temperature applications where low void content is critical. CYCOM 2237 has the best overall balance of processing behavior, thermo-oxidative stability and retention of properties in the 500 to 550°F (260 to 288°C) range. CYCOM 2237’s thermo-oxidative stability and micro-crack resistance make it ideal for jet engine and other fatigue loaded components like bypass ducts, gear box covers, transmission housings, vent tubes, fan stator and vane assemblies, nozzle flaps, core cowls, particle separator swirl frames and compression molded bearings. CYCOM 2237 prepreg can be autoclave cured, vacuum bag processed or compression molded. CYCOM 2237 is solution impregnated on a variety of fibers and fabrics. It is currently available on glass, quartz and graphite reinforcement. Product forms are unidirectional tape, non-woven mate and woven fabrics. Generally available widths are 12 inches for UD tape, 24 inches for mat and 60 inches for woven fabrics.&&

Product Description
Supplier	Cytec Industries
Generic	PI
Material Status	Commercial: Active
Features	High Heat Resistance,High pressure heat resistance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.31	g/cm³

MECHANICAL	Nominal value	Unit
Tensile modulus	38.6	MPa
tensile strength	3.93	MPa
Tensile strain
fracture	1.5	%

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.