CYCOM® 934 - SOLIAO

About
CYCOM® 934 is a high flow, 350°F (177°C) curing epoxy resin with good 200°F (93°C) wet and 350°F (177°C) dry service capability. CYCOM 934 is formulated for autoclave processing, but it has been successfully processed by press molding. Unidirectional tape and woven fabric impregnated with CYCOM 934 resin will retain good tack and drape for at least 10 days at 70°F (21°C). Standard cure is for two hours at 350°F (177°C). No post cure is required for 350°F (177°C) dry service capability. Recommended lay-up procedure is L-3 or L-6. Recommended cure procedure is C-5 or C-9. CYCOM 934 can be impregnated via hot melt or solution techniques on all available fibers and fabrics.&&

About

CYCOM® 934 is a high flow, 350°F (177°C) curing epoxy resin with good 200°F (93°C) wet and 350°F (177°C) dry service capability. CYCOM 934 is formulated for autoclave processing, but it has been successfully processed by press molding. Unidirectional tape and woven fabric impregnated with CYCOM 934 resin will retain good tack and drape for at least 10 days at 70°F (21°C). Standard cure is for two hours at 350°F (177°C). No post cure is required for 350°F (177°C) dry service capability. Recommended lay-up procedure is L-3 or L-6. Recommended cure procedure is C-5 or C-9. CYCOM 934 can be impregnated via hot melt or solution techniques on all available fibers and fabrics.&&

Product Description
Supplier	Cytec Industries
Generic	环氧树脂
Material Status	Commercial: Active
Features	Baking,High pressure heat resistance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.30	g/cm³

MECHANICAL	Nominal value	Unit
Tensile modulus
24℃	4140	MPa
tensile strength
24℃	82.7	MPa
Tensile strain
fracture	0.70	%
Bending modulus	4140	MPa
bending strength	68.9	MPa

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.