| About |
|---|
| CYROLITE CG-97 compound is an impact-modified acrylic-based multipolymer for molding and extrusion of medical applications. Typical properties of CYROLITE® acrylic-based multipolymer compounds are: excellent chemical resistance to fats and oils excellent bonding and welding capabilities excellent bonding to PVC tubing good impact strength good light transmission good resistance to EtO, gamma and E-beam sterilization BPS, BPA, and DEHP free The special properties of CYROLITE CG-97 compound are: superior resistance to lipids excellent gamma sterilization color stability high impact resistance very good resistance to alcohol APPLICATION: Used for injection molding and extrusion of medical devices.&& |
| Product Description | |
|---|---|
| Supplier | ROHM |
| Generic | PMMA |
| Material Status | Commercial: Active |
| Features | Good Clarity,High impact resistance,Ethanol tolerance,E-beam disinfection,Good color stability,Radiation disinfection,Solvent resistance,Welding,Ethylene oxide disinfection,Agglomerability |
| Availabilitys | North America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.08 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，5.0kg | 1.8 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD | 0.50 to 0.70 | % | ASTM D955 |
| Water absorption rate | |||
| saturated | 0.40 | % | ASTM D570 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed, 6.35 mm | 70.0 | ℃ | ASTM D648 |
| Vicat Softening Temp | 90.0 | ℃ | ASTM D1525 |
| Linear coefficient of thermal expansion | |||
| MD：0~156℃ | 9.5E-5 | 1/℃ | ASTM D696 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Transmittance | |||
| 3200 µm | 87.0 | % | ASTM D1003 |
| Haze | |||
| 81.3 µm | 5.0 | % | ASTM D1003 |
| Yellowness index | |||
| 3.20 mm | -0.30 | YI | ASTM D1925 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，3.2mm | 120 | J/m | ASTM D256 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 1860 | MPa | ASTM D638 |
| tensile strength | 36.3 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 14 | % | ASTM D638 |
| yield | 3.8 | % | ASTM D638 |
| Bending modulus | 1860 | MPa | ASTM D790 |
| bending strength | 67.6 | MPa | ASTM D790 |
| Rockwell hardness | |||
| Level L | 47 | ASTM D785 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| Drying temperature | 71 | °C | |
| Drying time | 3.0 to 4.0 | hr | |
| Processing (melt) temperature | 216 to 249 | °C | |
| Mold temperature | 49 to 82 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |