Daelim Po1y® LD-08A

About
Daelim Po1y® LD-08A is a Low Density Polyethylene product. It is available in Asia Pacific or Europe. Applications of Daelim Po1y® LD-08A include film and food contact applications. Characteristics include: Good Sealability Good Toughness Impact Resistant&&

Product Description
Generic	LDPE
Material Status	Commercial: Active
Features	Good flexibility,Good heat sealing,High impact resistance
Availabilitys	Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.922	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.50	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	200	µm
tensile strength			ASTM D882
MD, fracture	22.6	MPa	ASTM D882
TD, fracture	21.6	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture	440	%	ASTM D882
TD, fracture	470	%	ASTM D882
Drop hammer impact	650	g	ASTM D1709
Elmandorf tear strength			ASTM D1922
MD	150	g	ASTM D1922
TD	150	g	ASTM D1922

optical performance	Nominal value	Unit	Test method
Haze	17	%	ASTM D1003

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	160 to 190	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.