| About |
|---|
| Daelim Po1y® LH3750M is a Metallocene Medium Density Polyethylene product. It is available in Asia Pacific or Europe. Applications of Daelim Po1y® LH3750M include consumer goods, containers, food contact applications and tanks. Characteristics include: Impact Resistant Antioxidant Clarity Fast Molding Cycle Good Dimensional Stability&& |
| Product Description | |
|---|---|
| Generic | mMDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Weather resistance is good,Good Clarity,High impact resistance,Good Dimensional Stability,Quick molding cycle,High Heat Resistance,Inoxidizability,low-temperature impact resistance |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.938 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 5.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Fracture, molded | 20.6 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, molded | 850 | % | ASTM D638 |
| Bending modulus | |||
| Compression Molding | 637 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| -30 ℃, molded | 88 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 70.0 | ℃ | ASTM D648 |
| Vicat Softening Temp | 118 | ℃ | ASTM D1525 |
| Melting peak temperature | 124 | ℃ | ASTM D3418 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 60 °, molded into shape | 85 | ASTM D2457 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 200 to 280 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |