Daelim Po1y® XP9000

About
Daelim Po1y® XP9000 is a Metallocene Medium Density Polyethylene product. It is available in Asia Pacific or Europe. Applications of Daelim Po1y® XP9000 include food contact applications and plumbing/piping/potable water. Characteristics include: Antioxidant Good Aesthetics Good Processability Impact Resistant Processing Aid&&

Product Description
Generic	mMDPE
Material Status	Commercial: Active
Features	Excellent Processability,Good surface appearance,Inoxidizability,low-temperature impact resistance
Availabilitys	Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.935	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.60	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
Molded into shape, F50	> 10000	hr	ASTM D1693B

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Fracture, molded	39.2	MPa	ASTM D638
Tensile strain
Fracture, molded	850	%	ASTM D638
Bending modulus
Compression Molding	588	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
-30 ℃, molded	98	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	122	℃	ASTM D1525
Melting peak temperature	125	℃	ASTM D3418

optical performance	Nominal value	Unit	Test method
gloss
45 °, molded into shape	75		ASTM D2457

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	180 to 220	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.