DAPCO™ 3040 - SOLIAO

About
DAPCO™ 3040 is a two-component, very fast curing, self-extinguishing edge filling insert potting epoxy which cures at normal room temperature [77°F (25°C)]. Features & Benefits: Semi-thixotropic flow properties permitting use on vertical or overhead areas 100% solids content Side-by-side dispensing capability Five minute application allowing ten minute cutting ability FAR 25.853 Suggested Applications: DAPCO 3040 is used as an insert potting compound as well as edge filling for rapid tooling. The product can be applied through side-by-side cartridge.&&

About

DAPCO™ 3040 is a two-component, very fast curing, self-extinguishing edge filling insert potting epoxy which cures at normal room temperature [77°F (25°C)]. Features & Benefits: Semi-thixotropic flow properties permitting use on vertical or overhead areas 100% solids content Side-by-side dispensing capability Five minute application allowing ten minute cutting ability FAR 25.853 Suggested Applications: DAPCO 3040 is used as an insert potting compound as well as edge filling for rapid tooling. The product can be applied through side-by-side cartridge.&&

Product Description
Supplier	Cytec Industries
Generic	环氧树脂
Material Status	Commercial: Negative
Features	Self-extinguishing,Fast Cure
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density
—	0.990	g/cm³
—	1.10	g/cm³
—	1.15	g/cm³

THERMAL	Nominal value	Unit	Test method
Thermosetting components
resin	按重量计算的混合比: 100
Hardening method	按重量计算的混合比: 100

MECHANICAL	Nominal value	Unit
Shore hardness
Shaw’s D	70 to 80
tensile strength	24.1	MPa
Tensile strain
fracture	16	%
compressive strength
82℃	6.89	MPa
24℃	27.6	MPa

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.