| About |
|---|
| Dartek B-601 is a Polyamide 66 (Nylon 66) product. It can be processed by film extrusion, laminating, thermoforming, or vacuum forming and is available in North America. Applications of Dartek B-601 include packaging and film. Characteristics include: Chemical Resistant Clarity Heat Resistant Low to No Odor/Taste&& |
| Product Description | |
|---|---|
| Supplier | DuPont |
| Generic | PA66 |
| Material Status | Commercial: Active |
| Features | Good Clarity,Low odor,High Heat Resistance,Moisture resistance,Grease resistance |
| Availabilitys | North America |
| Process Methods | Thermo forming |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.15 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| friction coefficient | |||
| With oneself – static | 0.45 | ASTM D1894 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 25 | µm | |
| Secant modulus | ASTM D882 | ||
| 1% secant, MD | 689 | MPa | ASTM D882 |
| 1% secant, TD | 689 | MPa | ASTM D882 |
| tensile strength | ASTM D882 | ||
| MD, yield | 62.1 | MPa | ASTM D882 |
| TD, yield | 62.1 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture | 300 | % | ASTM D882 |
| TD, fracture | 300 | % | ASTM D882 |
| Drop hammer impact | 600 | g | ASTM D1709 |
| Elmandorf tear strength | ASTM D1922 | ||
| MD | 35 | g | ASTM D1922 |
| TD | 30 | g | ASTM D1922 |
| Oxygen permeability | 0.20 | cm³·mm/m²/atm/24 hr | ASTM D3985 |
| Water vapor permeability | 9.3 | g/m²/24 hr | ASTM E96 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | 1.5 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |