Deco-Coat™ UV Cure 7155™

About
UV Cure 7155™ and 7156™ are low intensity UV Curable Epoxy Resins. These products are water clear and cure to a smooth, bubble free finish. Low cost, low intensity lights are all that is needed to cure these unique polymer systems. UV Cure 7155™ and 7156™ also have superior aging and yellowing resistance. Applications: UV Cure 7155™ and 7156™ may be used as decorative ultra clear doming resins on labels, pins, key fobs, magnets, ceramics, etc… UV Cure 7155™ and 7156™ have outstanding adhesion to photographic paper. Their high gloss finish and outstanding clarity will enhance any image it is applied over. These materials can also be used as protective coatings due to their ability to resist moisture, chemicals and thermal shock. Benefits: No weighing or mixing Single component Cures in minutes Non-solvent 100% solids system Can be cured with low intensity black light&&

About

UV Cure 7155™ and 7156™ are low intensity UV Curable Epoxy Resins. These products are water clear and cure to a smooth, bubble free finish. Low cost, low intensity lights are all that is needed to cure these unique polymer systems. UV Cure 7155™ and 7156™ also have superior aging and yellowing resistance. Applications: UV Cure 7155™ and 7156™ may be used as decorative ultra clear doming resins on labels, pins, key fobs, magnets, ceramics, etc… UV Cure 7155™ and 7156™ have outstanding adhesion to photographic paper. Their high gloss finish and outstanding clarity will enhance any image it is applied over. These materials can also be used as protective coatings due to their ability to resist moisture, chemicals and thermal shock. Benefits: No weighing or mixing Single component Cures in minutes Non-solvent 100% solids system Can be cured with low intensity black light&&

Product Description
Generic	环氧树脂
Material Status	Commercial: Active
Features	Good Rigidity,Good Clarity,Good surface appearance,UV Cure,Good bond,Moisture resistance,Good thermal shock resistance,Solvent resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
Uncured Properties	Nominal value	Unit	Test method
colour	Clear/Transparent
Solid content	100	%
Density
25℃	1.09	g/cm³
viscosity
25℃	1.0	Pa·s
Storage period
4℃	6	month

Cured Properties	Nominal value	Unit
Shore hardness
Shaw’s D	70
tensile strength	60.7	MPa
Tensile strain
fracture	6.1	%
Relative permittivity
60 Hz	3.16
Volume resistivity	1.6E+9	ohms·cm
Dissipation factor
60 Hz	0.018

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.