| About |
|---|
| injection molding grade; with high mechanical strength for articles subject to wear; excellent abrasion resistance; good wear resistance; very easy release; very short cycle times; opaque to translucent; Cylindrical pellets; Rollers; Ear-tags; Technical parts&& |
| Product Description | |
|---|---|
| Supplier | Covestro |
| Generic | TPU |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Quick molding cycle,Good stripping performance,Good wear resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.22 | g/cm³ | ISO 1183 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | |||
| 23℃ | 150 | kN/m | ISO 34-1 |
| Compression deformation | |||
| 23℃，72 hr | 31 | % | |
| 70℃，24 hr | 47 | % | |
| Resilience | 47 | % | ISO 4662 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 1 second, 23 ℃ | 97 | ||
| Shore D, 1 second, 23 ℃ | 55 | ||
| tensile strength | |||
| 300% 应变，23℃ | 37.0 | MPa | DIN 53504 |
| abrasion resistance | 30.0 | mm³ | ISO 4649 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 225 to 245 | °C | |
| Mold temperature | 40 to 60 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 7.9 in/min |
| 3. Method A |
| 4. 20 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |