| About |
|---|
| injection molding grade; modified with ABS; good low-temperature flexibility; good wear resistance; Application; Ski boot shells; Injection molded engineering parts&& |
| Product Description | |
|---|---|
| Supplier | Covestro |
| Generic | TPU-酯 |
| Material Status | Commercial: Active |
| Features | Good flexibility,High impact resistance,Good wear resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Shore hardness | |||
| Shore D, 23 ℃ | 65 | ISO 868 | |
| tensile strength | DIN 53504 | ||
| Fracture, 23 ℃ | 55.0 | MPa | DIN 53504 |
| 100% strain, 23 ℃ | 29.0 | MPa | DIN 53504 |
| 300% Strain, 73°F | 42.0 | MPa | DIN 53504 |
| Tensile strain | |||
| Fracture, 23 ℃ | 410 | % | DIN 53504 |
| Bending modulus | |||
| 23℃ | 435 | MPa | ISO 178 |
| Tensile storage modulus | ISO 6721-1,-4 | ||
| -20℃ | 1.87 | GPa | ISO 6721-1,-4 |
| 20℃ | 0.760 | GPa | ISO 6721-1,-4 |
| 60℃ | 0.280 | GPa | ISO 6721-1,-4 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | < 110 | °C | |
| Processing (melt) temperature | 230 to 245 | °C | |
| Mold temperature | 40 to 60 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |