Devcon Underwater Repair Putty (UW)

About
Makes (effective) repairs to metal, concrete, wood surfaces in wet and dry environments. Intended Use: Repairing and refitting pipes, valves, pumps, and tanks. Repair concrete vessels and piping in wet environments. This product will bond to a wet or damp surface. Product features: Bonds to aluminum, concrete, and many other metals Bonds to ferrous and non-ferrous metals Non-rusting Bonds to wet surfaces Bonds, patches, and seals metals Non-sagging&&

About

Makes (effective) repairs to metal, concrete, wood surfaces in wet and dry environments. Intended Use: Repairing and refitting pipes, valves, pumps, and tanks. Repair concrete vessels and piping in wet environments. This product will bond to a wet or damp surface. Product features: Bonds to aluminum, concrete, and many other metals Bonds to ferrous and non-ferrous metals Non-rusting Bonds to wet surfaces Bonds, patches, and seals metals Non-sagging&&

Product Description
Supplier	Devcon
Generic	环氧树脂
Material Status	Commercial: Active
Features	Agglomerability
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.40	g/cm³
Specific volume	0.614	cm³/g
Shrinkage rate
MD	0.20	%	ASTM D2566
Solid content
by Volume	100	%

Electrical performance	Nominal value	Unit	Test method
Dielectric strength	5.9	kV/mm	ASTM D149
Dielectric constant	8.60		ASTM D150

Supplementary information	Nominal value	Unit	Test method
Heat resistant temperature
Dry	121	℃
Wet	49	℃
Tensile shear strength	18.5	MPa	ASTM D1002

Uncured Properties	Nominal value	Unit	Test method
Curing time	24	hr

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	82		ASTM D2240
Tensile modulus	5170	MPa	ASTM D638
bending strength	34.4	MPa	ASTM D790
compressive strength	38.8	MPa	ASTM D695

THERMAL	Nominal value	Unit	Test method
Linear coefficient of thermal expansion
MD	3.2E-5	1/℃	ASTM D696
Thermosetting components
Component A	按容量计算的混合比: 1.0 按重量计算的混合比: 1.4
Component B	按容量计算的混合比: 1.0 按重量计算的混合比: 1.0
storage stability
24 ℃	45	min

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.