DeWAL DW 203 - SOLIAO

About
D/W 203 is an unsintered PTFE (Polytetrafluoroethylene) film used primarily for electrical insulation, particularly for wire and cable applications. The polymer is fibrilated giving good strength in the machine direction. It has the inherent benefits of PTFE: exceptional chemical resistance, extreme temperature range from 450F to +500F, low coefficient of friction, excellent drape characteristics and non-stick properties. D/W 203 is used in cable insulation, harness wrap, and as the dielectric medium in coaxial cables. Once sintered, it seals completely to provide excellent electrical insulating properties, unsurpassed chemical resistance and excellent thermal resistance. DeWAL’s unsintered PTFE tape has good drape characteristics allowing it to conform smoothly to complicated shapes. D/W 203 can be used for gaskets, expansion joints, valve seals and diaphragm applications. It is available unpigmented and pigmented to match EIA colors. It has good strength after sintering and is used where chemical inertness and high temperature resistance are needed.&&

About

D/W 203 is an unsintered PTFE (Polytetrafluoroethylene) film used primarily for electrical insulation, particularly for wire and cable applications. The polymer is fibrilated giving good strength in the machine direction. It has the inherent benefits of PTFE: exceptional chemical resistance, extreme temperature range from 450F to +500F, low coefficient of friction, excellent drape characteristics and non-stick properties. D/W 203 is used in cable insulation, harness wrap, and as the dielectric medium in coaxial cables. Once sintered, it seals completely to provide excellent electrical insulating properties, unsurpassed chemical resistance and excellent thermal resistance. DeWAL’s unsintered PTFE tape has good drape characteristics allowing it to conform smoothly to complicated shapes. D/W 203 can be used for gaskets, expansion joints, valve seals and diaphragm applications. It is available unpigmented and pigmented to match EIA colors. It has good strength after sintering and is used where chemical inertness and high temperature resistance are needed.&&

Product Description
Generic	PTFE
Material Status	Commercial: Active
Features	Good Rigidity,No viscosity,Low coefficient of friction,High Heat Resistance,Solvent resistance,Insulation
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.50	g/cm³
Thickness	50.8 to 508.0	µm

film	Nominal value	Unit	Test method
tensile strength			ASTM D882
MD, yield, 51 µ m	12.4	MPa	ASTM D882
MD, yield, 130 µ m	10.3	MPa	ASTM D882
Tensile strain
MD, fracture	30	%	ASTM D882

Supplementary information	Nominal value	Unit
Base material	Extruded PTFE Film
Core ID	7.62	cm
Maximum Roll OD	279	mm
Width	12.7 to 279	mm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.