DeWAL DW 220

About
A Skived PTFE film that is produced from a modified homopolymer PTFE resin containing <1% of a fully fluorinated comonomer. The incorporation of the comonomer yields a material with improved electrical and physical properties. This film can be thermally fused to itself. The modified homopolymer resin exhibits chemical resistance equivalent to that of a standard homopolymer PTFE. It's tensile strength is approximately 10% higher and the elongation is approximately 30% higher than for a standard homopolymer PTFE. With its ability to be heat fused, this film finds applications in the convoluted PTFE hose industry as a inner liner material.&&

Product Description
GenericPTFE
Material StatusCommercial: Active
FeaturesGood Electrical Properties,Good Tensile Strength,Solvent resistance,Homopolymer
AvailabilitysNorth America,Europe

Technical Data
PHYSICALNominal valueUnitTest method
Thickness25.4 to 1020nm

filmNominal valueUnitTest method
tensile strength
MD, yield24.8MPaASTM D882
Tensile strain
MD, fracture250%ASTM D882

THERMALNominal valueUnitTest method
Continuous use temperature260

Electrical performanceNominal valueUnitTest method
Dielectric strength98kV/mmASTM D149

Supplementary informationNominal valueUnitTest method
Core ID7.62cm
Maximum Roll OD356mm
Width6.35 to 1140mm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.