DGDK-6924 NT EXP1

About
DGDK-6924 NT EXP1 is a high density polyethylene compound designed for use in physical foaming processes where high expansion rates (40 – 70%) are required. This compound is designed to offer excellent high speed processability as given by low extrusion pressures and smooth insulation surface quality. Furthermore, since it is fully pre-compounded with all the necessary ingredients, DGDK-6924 NT EXP1 offers better dispersion of the nucleating agent allowing high expansion rates to be achieved with more consistent processability (capacitance and diameter). It is stabilized for long term cable performance in data cable applications. Applications: Typical applications include LAN and data center cables. Specifications DGDK-6924 NT EXP1 should meet the following material specifications: – ASTM D 1248 Class A, Type III, Category 3 – ISO 1875-PE, KGHN, 45-D-045&&

About

DGDK-6924 NT EXP1 is a high density polyethylene compound designed for use in physical foaming processes where high expansion rates (40 – 70%) are required. This compound is designed to offer excellent high speed processability as given by low extrusion pressures and smooth insulation surface quality. Furthermore, since it is fully pre-compounded with all the necessary ingredients, DGDK-6924 NT EXP1 offers better dispersion of the nucleating agent allowing high expansion rates to be achieved with more consistent processability (capacitance and diameter). It is stabilized for long term cable performance in data cable applications. Applications: Typical applications include LAN and data center cables. Specifications DGDK-6924 NT EXP1 should meet the following material specifications: – ASTM D 1248 Class A, Type III, Category 3 – ISO 1875-PE, KGHN, 45-D-045&&

Product Description
Supplier	DOW
Generic	HDPE
Material Status	Commercial: Active
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.952	g/cm³	ISO 1183
Melt Flow Rate
140℃，5.0kg	5.5	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore D, 1 second	65		ISO 868

THERMAL	Nominal value	Unit	Test method
Oxygen sensing time
200℃	> 50	min	ASTM D3895

Electrical performance	Nominal value	Test method
Dielectric constant
1 MHz	2.30	IEC 60250
Dissipation factor
50 Hz	1.0E-4	IEC 60250

Cured Properties	Nominal value	Unit	Test method
tensile strength	21.0	MPa	IEC 60811-501
Tensile strain
fracture	1400	%	IEC 60811-501

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	170 to 190	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.