About |
---|
Expandable polystyrene (EPS) a branch of polystyrene resin containing approximately 6 wt% pentane as the blowing agent. All products are supplied in spherical beads with a bulk density of approximately 14-25 g/ l. Material is classified as HFI, as for test method ASTM 4986. Characteristics: Good shock absorbency. Easy to form and process. No hard core. Low Volatility. Good fusion & perform grade.&& |
Product Description | |
---|---|
Generic | PS (EPS) |
Material Status | Commercial: Negative |
Features | Excellent Processability,noise reduction |
Availabilitys | Africa & Middle East ,Asia Pacific,Europe |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.03 | g/cm³ | |
Apparent density | 0.60 | g/cm³ | |
humidity | < 2.0 | % |
Supplementary information | Nominal value | Unit | Test method |
---|---|---|---|
Monomer Residue | < 0.35 | % |
Notes |
---|
1. Pentane |
2. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |