| About |
|---|
| Photosensitive Resin for DigitalWax® J Series Stereolithography Systems DC100 Casting Resin was specially developed for direct investment casting of jewelry models. DC100 Casting Resin allows the building of detailed parts with high quality resolution, dimensional accuracy and smooth surfaces which do not require any other manual finishing. DC100 Casting Resin is suitable for direct casting of jewelry models. Models made of DC100 Casting Resin have perfectly stable and accurate shapes and dimensions. Features Smooth surface High resolution High accuracy No further manual finishing needed&& |
| Product Description | |
|---|---|
| Generic | 3D打印材料 |
| Material Status | Commercial: Active |
| Features | Good surface appearance |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| viscosity | |||
| 25℃ | 0.4 to 0.6 | Pa·s | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 74 | ||
| Bending modulus | 286 | MPa | |
| bending strength | 18.6 | MPa |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Liquid Resin |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |