| About |
|---|
| Photosensitive Resin for DigitalWax® J Series Stereolithography Systems DC500 Casting Resin was specially developed for direct investment casting of jewelry models. DC500 Casting Resin allows the building of detailed parts with high quality resolution and smooth surfaces which do not require any other manual finishing. The elasticity of the DC500 Casting Resin allows you to set the stones directly in the resin model. DC500 Casting Resin is the perfect material for thin wire patterns which are impossible to be replicated using rubber moulding methods. Features Smooth surface High resolution High accuracy No further manual finishing needed&& |
| Product Description | |
|---|---|
| Generic | 3D打印材料 |
| Material Status | Commercial: Active |
| Features | Good surface appearance |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| viscosity | |||
| 25℃ | 0.4 to 0.6 | Pa·s | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 48 | ||
| Bending modulus | 95.0 | MPa | |
| bending strength | 5.20 | MPa |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Liquid Resin |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |