DIGITALWAX® DL 260

About
Photosensitive Resin for DigitalWax® X Series Stereolithography Systems DL 260 Moulding Resin is a nano-filled ceramic resin specially developed for rubber moulding applications, including VLT, liquid silicones and vulcanized rubber at medium-low temperatures (max. 90°C). DL260 Moulding Resin is suitable both for thin and thick models. DL260 Moulding Resin can be used to make rubber moulds with liquid silicones and rubber vulcanized at a maximum temperature of 90°C. Models made of DL260 resin can be removed easily from the rubber mould and they can also be broken, allowing you to carry out some difficult cuts that would be even impossible with a metal model. DL260 delivers extremely smooth surfaces and exceptionally precise and sharp details. Features Smooth surface High resolution High accuracy No further manual finishing needed&&

About

Photosensitive Resin for DigitalWax® X Series Stereolithography Systems DL 260 Moulding Resin is a nano-filled ceramic resin specially developed for rubber moulding applications, including VLT, liquid silicones and vulcanized rubber at medium-low temperatures (max. 90°C). DL260 Moulding Resin is suitable both for thin and thick models. DL260 Moulding Resin can be used to make rubber moulds with liquid silicones and rubber vulcanized at a maximum temperature of 90°C. Models made of DL260 resin can be removed easily from the rubber mould and they can also be broken, allowing you to carry out some difficult cuts that would be even impossible with a metal model. DL260 delivers extremely smooth surfaces and exceptionally precise and sharp details. Features Smooth surface High resolution High accuracy No further manual finishing needed&&

Product Description
Generic	3D打印材料
Material Status	Commercial: Active
Features	Good surface appearance,Good stripping performance
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
viscosity
25℃	1.50 to 2.20	Pa·s

MECHANICAL	Nominal value	Unit
Shore hardness
Shaw’s D	88
Bending modulus	1820	MPa
bending strength	73.1	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
2. Liquid Resin
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.