| About |
|---|
| Photosensitive Resin for DigitalWax® D Series Stereolithography Systems DS 2000 is specially developed for production of 3D Medical models. Features Smooth surface High resolution High accuracy Durable Transparent&& |
| Product Description | |
|---|---|
| Generic | 3D打印材料 |
| Material Status | Commercial: Active |
| Features | Good surface appearance,Durability |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| viscosity | |||
| 25℃ | 0.6 to 0.8 | Pa·s | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 55.0 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 87 | ||
| Tensile modulus | 1340 | MPa | |
| tensile strength | 30.0 | MPa | |
| Tensile strain | |||
| fracture | 7.0 | % | |
| Bending modulus | 2110 | MPa | |
| bending strength | 94.6 | MPa |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Liquid Resin |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |