DJSilicone NE-9430

About
High-transparency fumed rubber High-transparency fumed rubber has high grade of transparency, excellent physical properties & yellowing resistance and good processability. They are applicable to molded products and can be used in food contact grade products with extremely requirement for high transparency, such as: nipple, bite stick, etc.&&

Product Description
SupplierDONGJUE
Generic硅酮
Material StatusCommercial: Active
FeaturesGood Clarity,Good color stability
AvailabilitysAsia Pacific

Technical Data
PHYSICALNominal valueUnitTest method
Density1.03 to 1.11g/cm³ASTM D1505
Shrinkage rate
MD3.2 to 3.7%ASTM D955

MECHANICALNominal valueUnitTest method
Shore hardness
Shaw’s A30 to 34 ASTM D2240

elastic bodyNominal valueUnitTest method
Tensile permanent deformation< 8%ASTM D412
tensile strength
yield> 8.00MPaASTM D412
Tensile strain
fracture> 700%ASTM D412
tear strength> 20.0kN/mASTM D624

Electrical performanceNominal valueUnitTest method
Volume resistivity1.0E+16ohms·cmASTM D257
Dielectric strength> 22kV/mmASTM D149

Notes
1. Typical properties: these are not to be construed as specifications.
2. Die B
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.