DJSilicone NE-D-1/NE-D-1U

About
DAI-EL™ G-701 DAI-EL G-701 is a cure-incorporated copolymer with medium Mooney viscosity. It is designed especially for compression molding of o-rings and other applications that require good heat resistance and compression set.&&DAI-EL™ G-701 DAI-EL G-701 is a fluoroelastomer comprising copolymer of vinylidenefluoride and hexafluoropropylene. It contains a curing agent (bisphenol AF) and cure accelerator. DAI-EL G-701 is a standard grade of DAI-EL as polyol cure, and is suitable for the compression molding with relatively simple shapes such as O-rings.&&

About

DAI-EL™ G-701 DAI-EL G-701 is a cure-incorporated copolymer with medium Mooney viscosity. It is designed especially for compression molding of o-rings and other applications that require good heat resistance and compression set.&&DAI-EL™ G-701 DAI-EL G-701 is a fluoroelastomer comprising copolymer of vinylidenefluoride and hexafluoropropylene. It contains a curing agent (bisphenol AF) and cure accelerator. DAI-EL G-701 is a standard grade of DAI-EL as polyol cure, and is suitable for the compression molding with relatively simple shapes such as O-rings.&&

Product Description
Supplier	DONGJUE
Generic	硅酮
Material Status	Commercial: Active
Features	Good Dimensional Stability,Copolymer,Fast Cure
Availabilitys	North America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.45 to 1.51	g/cm³	ASTM D1505

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	56 to 60		ASTM D2240

elastic body	Nominal value	Unit	Test method
Tensile permanent deformation	< 2	%	ASTM D412
tensile strength
yield	> 4.00	MPa	ASTM D412
Tensile strain
fracture	> 240	%	ASTM D412
tear strength	> 13.0	kN/m	ASTM D624

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	> 3.0E+14	ohms·cm	ASTM D257
Dielectric strength	> 18	kV/mm	ASTM D149
Dielectric constant	3.00 to 4.00		ASTM D150
Dissipation factor	< 0.070		ASTM D150

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	FV-0

Supplementary information	Nominal value	Unit
Erosion resistance
Erosion depth	< 2.50	mm
Electric resistance trace	TMA4.5

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.