| About |
|---|
| Flame retardant rubber This product has good physical, mechanical and electrical properties, superior flame retardance and self-extinguishing property. The flame retardance of 3mm test piece can reach the class FV-0 stated in the national standard GB/T10707-2008. This product complies with the requirements of ROHS and is applicable to manufacturing of electronic and electric products with flame retardance and insulativity, such as flame retardant gaskets, flame retardant seal rings and wire sheaths for cold cathode fluorescent lamps.&& |
| Product Description | |
|---|---|
| Supplier | DONGJUE |
| Generic | 硅酮 |
| Material Status | Commercial: Active |
| Features | Good Electrical Properties,Flame Characteristics,Insulation |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.44 to 1.50 | g/cm³ | ASTM D1505 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 47 to 53 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile permanent deformation | < 7 | % | ASTM D412 |
| tensile strength | |||
| yield | > 5.00 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | > 350 | % | ASTM D412 |
| tear strength | > 15.0 | kN/m | ASTM D624 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 5.0E+14 | ohms·cm | ASTM D257 |
| Dielectric strength | > 20 | kV/mm | ASTM D149 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | FV-0 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die B |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |