About |
---|
Developed for blown film applications, BSR-09® is a new kind of compostable resin made from renewable sources of agricultural origin. With similar technical and mechanical properties to that of conventional LDPE, BSR-09® ensures the quality of end products. BSR-09® is EN13432 certified and also complies with ASTM D6400, ISO17088:2088, GB/T20197 international standards for biodegradability. The biodegradation rate of BSR-09® will reach 99% with the period of 90~180 days, giving the right composting condition, and converts into water and carbon dioxide.&& |
Product Description | |
---|---|
Supplier | Disoxidation |
Generic | 生物可降解聚合物 |
Material Status | Commercial: Active |
Features | Renewable resources,Biodegradable,Compostable |
Availabilitys | North America,Asia Pacific,Europe |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.20 to 1.30 | g/cm³ | GB/T 1033 |
Melt Flow Rate | 2.0 to 5.0 | g/10min | ISO 1133 |
water content | < 1.0 | % | Internal Method |
Biomass content | > 90 | % | Internal Method |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
tensile strength | > 15.0 | MPa | GB/T 1040 |
Tensile strain | |||
fracture | > 350 | % | GB/T 1040 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Softening temperature | > 80 | ℃ | GB/T 1633 |
Supplementary information | Nominal value | Unit | Test method |
---|---|---|---|
Biodegradability | > 90 | % | EN 13432 |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |