Dow Corning® MG 7-9800

About
Two-Part, Fillerless Soft Adhesive Elastomers APPLICATIONS Dow Corning MG 7-9800 Soft Skin Adhesive, Dow Corning MG 7-9850 Soft Skin Adhesive and Dow Corning MG 7-9900 Soft Skin Adhesive are intended for adhesion to skin, including over-the-counter bandages and scar therapies. DESCRIPTION Dow Corning® Soft Skin Adhesives are two-part platinum catalyzed, fillerless, silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications. These adhesive elastomers are based on a platinum catalyzed polydimethylsiloxane composition that will cure at a variety of temperatures, from ambient to 140°C, without the formation of by-products. The adhesive elastomer is supplied as a two-component kit that must be thoroughly blended together prior to use.&&

About

Two-Part, Fillerless Soft Adhesive Elastomers APPLICATIONS Dow Corning MG 7-9800 Soft Skin Adhesive, Dow Corning MG 7-9850 Soft Skin Adhesive and Dow Corning MG 7-9900 Soft Skin Adhesive are intended for adhesion to skin, including over-the-counter bandages and scar therapies. DESCRIPTION Dow Corning® Soft Skin Adhesives are two-part platinum catalyzed, fillerless, silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications. These adhesive elastomers are based on a platinum catalyzed polydimethylsiloxane composition that will cure at a variety of temperatures, from ambient to 140°C, without the formation of by-products. The adhesive elastomer is supplied as a two-component kit that must be thoroughly blended together prior to use.&&

Product Description
Supplier	Dow Corning
Generic	硅酮
Material Status	Commercial: Active
Features	Excellent Processability,Low Viscosity
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
viscosity
Part A	0.4	Pa·s
Part B	0.4	Pa·s

Supplementary information	Nominal value	Unit
Adhesion（PC film）	0.600	N/2.5 cm
Penetration After Cure	95.0	mm/10
Release（PE Film）	0.110	N/2.5 cm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.