| About |
|---|
| DOW ENDURANCE™ HFDA-9563 BK is a cross-linkable semiconductive polyethylene designed for conductor and bonded insulation shielding of power cables, which meets the requirements of AEIC CS 5-87, AEIC CS 7-87, ICEA S-66-524 and IEC 60840. It has the following important advantages. 1. Super smooth extruded surface 2. Good scorch resistance 3. Strong adhesion to insulation layer 4. Good thermal stability 5. Excellent electric conductivity&& |
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | PE |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.16 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，21.6kg | 12 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | > 200 | hr | ASTM D1693 |
| The degree of cross combination | > 75 | % | ASTM D2765A |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strength retention rate | |||
| 168 hrs，150℃ | > 85 | % | ASTM D638 |
| Elongation retention rate |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -40.0 | ℃ | ASTM D746 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | ASTM D991 | ||
| 23℃ | 15 | ohms·cm | |
| 90 ℃ | 1.5E+2 | ohms·cm |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| MDR | Internal Method | ||
| Tmax：180℃ | J | ||
| TS2：180℃ | > 2.0 | min |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 53 | ASTM D2240 | |
| tensile strength | 13.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 220 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. without peroxide |
| 3. Curing Condition: 180°C, 25min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |