DOW™ VLDPE DFDA-1010 NT 7

About
Low modulus film Excellent compatibility with polypropylene and polyethylene Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a Complies with EU, No 10/2011 Consult the regulations for complete details. DFDA-1010 NT 7 Very Low Density Polyethylene (VLDPE) Resin is produced via gas phase polymerization from Dow. This is an ethylene-butene copolymer exhibiting high flexibility and elasticity. It can be utilized in monolayer and coextruded films and in blends with other polyolefins to enhance toughness of the structure.&&

About

Low modulus film Excellent compatibility with polypropylene and polyethylene Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a Complies with EU, No 10/2011 Consult the regulations for complete details. DFDA-1010 NT 7 Very Low Density Polyethylene (VLDPE) Resin is produced via gas phase polymerization from Dow. This is an ethylene-butene copolymer exhibiting high flexibility and elasticity. It can be utilized in monolayer and coextruded films and in blends with other polyolefins to enhance toughness of the structure.&&

Product Description
Supplier	DOW
Generic	VLDPE
Material Status	Commercial: Active
Availabilitys	North America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.906	g/cm³	ASTM D792
Melt Flow Rate			ASTM D1238
190℃，2.16kg	0.85	g/10min	ASTM D1238
190℃，21.6kg	20	g/10min	ASTM D1238

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	-38.9	℃	Internal Method
Melting temperature
DSC	119	℃	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness			ASTM D2240
Shore A, 1 second	91		ASTM D2240
Shore A, 5 seconds	95		ASTM D2240
tensile strength
fracture	23.8	MPa	ASTM D638
Tensile strain
fracture	800	%	ASTM D638
Bending modulus
2% secant	152	MPa	ASTM D790-A

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.