DOWLEX™ 2032

About
Linear Low Density Polyethylene Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a Complies with Canadian HPFB No Objection (With Limitations) Complies with EU, No 10/2011 Complies with Japan Hygienic Olefin and Styrene Plastics Association Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Availabilitys	North America,Asia Pacific

film	Nominal value	Unit	Test method
film thickness
test	25	µm
Membrane puncture resistance
25 µm	18.2	J/cm³	Internal Method
Membrane strength			ASTM D882
MD：25 µm	255	J/cm³	ASTM D882
TD：25 µm	228	J/cm³	ASTM D882
tensile strength			ASTM D882
MD, yield, 25 µ m	12.0	MPa	ASTM D882
TD, yield, 25 µ m	11.9	MPa	ASTM D882
MD, fracture, 25 µ m	64.3	MPa	ASTM D882
TD, fracture, 25 µ m	35.2	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture, 25 µ m	470	%	ASTM D882
TD, fracture, 25 µ m	680	%	ASTM D882
Drop hammer impact
25 µm	120	g	ASTM D1709-A
Elmandorf tear strength			ASTM D1922
MD：25 µm	320	g	ASTM D1922
TD：25 µm	680	g	ASTM D1922

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	109	℃	ASTM D1525
Melting temperature
DSC	124	℃	Internal Method

optical performance	Nominal value	Unit	Test method
gloss
45°，25.4 µm	91		ASTM D2457
Haze
25.4 µm	2.1	%	ASTM D1003

Notes
1. With limitations
2. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.