| About |
|---|
| Linear Low Density Polyethylene Fast processing on narrow die gaps For blown film paper product overwrap applications Complies with: U.S. FDA 21 CFR 177.1520 (c) 3.2a. Canadian HPFB No Objection (With Limitations) EU, No 10/2011 U.S. FDA-DMF Consult the regulations for complete details.&& |
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.935 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 1.0 | g/10min | ASTM D1238 | |
| thickness | 25.4 | g/min | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 15.23 | MPa | ASTM D882 |
| tensile strength | 16.72 | MPa | ASTM D882 |
| Secant modulus | 377.3 | MPa | ASTM D882 |
| Secant modulus | 348.5 | MPa | ASTM D882 |
| tensile strength | 38.34 | MPa | ASTM D882 |
| tensile strength | 33.13 | MPa | ASTM D882 |
| impact force | 93 | ft-lbf/in3 | |
| Tensile strain | |||
| fracture | 522 | % | ASTM D882 |
| Tensile strain | |||
| fracture | 656 | % | ASTM D882 |
| tear strength | 71 | g | ASTM D192 |
| tear strength | 413 | g | ASTM D192 |
| Drop hammer impact | 112 | g | ASTM D1709 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | 58 | ASTM D2457 | |
| Haze μ M | 7.0 | % | ASTM D1003 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 126 | ℃ | Internal Method |
| Vicat Softening Temp | |||
| 120 | ℃ | ASTM D1525 |
| Other performance | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 2.80 | g/micron | ASTM D1922 |
| tear strength | 16.3 | g/micron | ASTM D1922 |
| impact force | 1178 | ft-lbf/in3 | ASTM D882 |
| impact force | 1389 | ft-lbf/in3 | ASTM D882 |
| Notes |
|---|
| 1. With limitations |
| 2. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |