DOWLEX™ 2606 GC

About
DOWLEX 2606 GC Polyethylene Resinis specifically designed for large/high output cast film lines to make high performance industrial stretch films. Films made from DOWLEX 2606 GC exhibit an excellent balance of processability, mechanical and stretchability performance properties. DOWLEX 2606 GC Polyethylene Resin is to be used as a core resin in coextruded cast film structures for films in the thickness range between 10 and 35 microns. Complies with: EU, No10/2011 U.S. FDA FCN 741 Consult the regulations for complete details.&&

About

DOWLEX 2606 GC Polyethylene Resinis specifically designed for large/high output cast film lines to make high performance industrial stretch films. Films made from DOWLEX 2606 GC exhibit an excellent balance of processability, mechanical and stretchability performance properties. DOWLEX 2606 GC Polyethylene Resin is to be used as a core resin in coextruded cast film structures for films in the thickness range between 10 and 35 microns. Complies with: EU, No10/2011 U.S. FDA FCN 741 Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.920	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	4.0	g/10min	ISO 1133

film	Nominal value	Unit	Test method
film thickness
test	23	µm
Membrane puncture strength
23 µm	133	J
Membrane puncture force
23 µm	31.0	N
tensile strength			ASTM D882
MD, yield, 23 µ m	6.00	MPa	ASTM D882
TD, yield, 23 µ m	6.00	MPa	ASTM D882
MD, fracture, 23 µ m	36.0	MPa	ASTM D882
TD, fracture, 23 µ m	25.0	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture, 23 µ m	400	%	ASTM D882
TD, fracture, 23 µ m	680	%	ASTM D882
Drop hammer impact
23 µm	110	g	ASTM D1709-A
Elmandorf tear strength			ASTM D1922
MD：23 µm	150	g	ASTM D1922
TD：23 µm	450	g	ASTM D1922

MECHANICAL	Nominal value	Unit	Test method
Maximum tensile force, 23.0 µ m	36000	g	Internal Method
Maximum elongation, 23.0 µ m	350	%	Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.