DOWLEX™ GM 8480F

About
DOWLEX™ GM 8480F Polyethylene Resins suitable for cast stretch film applications with superior extensibility while maintaining good puncture and load retention. Main Characteristics Superior extensibility Good puncture and load retention Complies with: U.S. FDA FCN 741 Canadian HPFB No Objection EU, No, 10/2011 Consult the regulations for complete details&&

Product Description
Supplier	DOW
Generic	Linear low density polyethylene
Material Status	Commercial: Negative
Availabilitys	North America,Latin America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.917	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	3.0	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	20	µm
Membrane puncture resistance	22.9	J/cm³	Internal Method
tensile strength			ASTM D882
MD, yield	9.97	MPa	ASTM D882
TD, yield	8.49	MPa	ASTM D882
MD, fracture	32.3	MPa	ASTM D882
TD, fracture	18.9	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture	320	%	ASTM D882
TD, fracture	360	%	ASTM D882
Drop hammer impact	340	g	ASTM D1709-A
Elmandorf tear strength			ASTM D1922
MD	210	g	ASTM D1922
TD	360	g	ASTM D1922

THERMAL	Nominal value	Unit	Test method
Melting temperature
DSC	121	℃	Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.