DOWLEX™ NG 5045P

About
DOWLEX™ NG 5045P is a blown film extrusion linear low density polyethylene resin grade suitable for high toughness film applications. Main Characteristics: Linear Low Density Polyethylene/Octene Copolymer For film applications that require high toughness and optical properties or improved bubble stability Complies with: U.S. FDA FCN 424 EU, No 10/2011 Consult the regulations for complete details.&&

About

DOWLEX™ NG 5045P is a blown film extrusion linear low density polyethylene resin grade suitable for high toughness film applications. Main Characteristics: Linear Low Density Polyethylene/Octene Copolymer For film applications that require high toughness and optical properties or improved bubble stability Complies with: U.S. FDA FCN 424 EU, No 10/2011 Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.917	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	0.80	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	25	µm
Membrane puncture strength	6.50	J	Internal Method
Membrane puncture force	66.0	N	Internal Method
Membrane puncture resistance	32.9	J/cm³	Internal Method
Membrane strength
MD	95.1	J/cm³
TD	92.9	J/cm³
Secant modulus
1% secant, MD	185	MPa
2% secant, MD	159	MPa
1% secant, TD	221	MPa
2% secant, TD	184	MPa
tensile strength
MD, yield	11.0	MPa
TD, yield	11.3	MPa
MD, fracture	50.5	MPa
TD, fracture	39.7	MPa
Tensile strain
MD, fracture	470	%
TD, fracture	550	%
Drop hammer impact	720	g	ASTM D1709B
Elmandorf tear strength
MD	380	g
TD	590	g

THERMAL	Nominal value	Unit	Test method
Melting temperature
DSC	118	℃	Internal Method

optical performance	Nominal value	Unit	Test method
gloss
45°	71		ASTM D2457
Haze	5.7	%	ASTM D1003

Process Conditions
Squeeze description	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method

Melt temperature	230	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.