| About |
|---|
| Product Description | |
|---|---|
| Supplier | Dow Corning |
| Generic | 密封胶 |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | |||
| 25℃ | 1.4 | g/cm³ | CTM2 0044 |
| Flow/Sag (Collapse) | <5.2 | mm | ASTM D 2202 |
| locomotivity | -25 to 25 | % | CTM 0098 |
| Non sticky time | |||
| 50％RH | ASTM D 2377 | ||
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| A-level | 35 | ASTM C 661 | |
| Tensile strain | 10-25 | ||
| Modulus @ 100% maximum | 350 | % | ASTM D 412 |
| Sports ability |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| temperature range | -40 to 149 | ℃ | ASTM D 412 |
| Ozone resistance, thermal resistance, UV resistance, waterproof | ASTM D 412 | ||
| tensile strength | 1.6 | MPa | ASTM D 412 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |