| About |
|---|
| Dryflex 670271: Thermoplastic Elastomer Material Type: TPS-SEBS Hardness: 27 Shore 00 Service Temperature Range: -50 — +70°C (unstressed material) Colour: Natural, but can be available in any colour. Presentation: Free flowing pellets that can be processed without predrying, when stored under normal conditions. Weather Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils) Recyclability: 100% recyclable&& |
| Product Description | |
|---|---|
| Generic | SEBS |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Excellent Processability,Renewable resources,Solvent resistance |
| Availabilitys | Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.04 | g/cm³ | ASTM D792 |
| Melt Flow Rate | ASTM D1238 | ||
| 150℃，0.325kg | 2.1 | g/10min | ASTM D1238 |
| 150℃，2.16kg | 50 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s OO | 27 | ASTM D2240 | |
| Tensile modulus | ASTM D638 | ||
| 100% secant | 0.100 | MPa | ASTM D638 |
| 300% secant | 0.100 | MPa | ASTM D638 |
| tensile strength | 0.900 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 1000 | % | ASTM D638 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 4.40 | kN/m | ASTM D624 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Operating temperature | -50 to 70 | ℃ |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Barrel rear temperature | 140 to 210 | °C | |
| Barrel middle temperature | 140 to 210 | °C | |
| Barrel front temperature | 140 to 210 | °C | |
| Mold temperature | 15 to 50 | °C | |
| Barrel 1 zone temperature | 150 to 210 | °C | |
| Barrel 3 zone temperature | 150 to 210 | °C | |
| Barrel 5 zone temperature | 150 to 210 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Unstressed Material |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |