duoMatrix® G - SOLIAO

About
duoMatrix®-G is a new three component polymer additive system that greatly enhances the physical properties of alpha gypsum products duoMatrix®-G (Matrix-G® for short) reduces the demold and drying time of gypsum and drastically reduces water permeability making it suitable for both interior and exterior applications (for exterior use, product must be sealed – see “post finishing” section). Matrix®-G has less odor and yields elements that are a brighter white than competing products. Matrix®-G is easy to use and can be cast solid, laid up by hand with chopped fiber or sprayed. Fully cured pieces can be painted, sanded, machined and polished. Matrix®-G is used to make lightweight pieces that are very strong and water-resistant. Applications include making architectural elements, reproducing sculpture and special effects. Vibrant colors are possible by adding pigments. Metal powders (bronze, pewter, brass, etc.) can be added to give the look of real metal castings at a fraction of the cost. You can duplicate the look of marble or ceramic by adding inexpensive fillers. Note: duoMatrix®-C is also available as a one component additive for concrete/GFRC (Glass Fiber Reinforced Concrete) applications.&&

About

duoMatrix®-G is a new three component polymer additive system that greatly enhances the physical properties of alpha gypsum products duoMatrix®-G (Matrix-G® for short) reduces the demold and drying time of gypsum and drastically reduces water permeability making it suitable for both interior and exterior applications (for exterior use, product must be sealed – see “post finishing” section). Matrix®-G has less odor and yields elements that are a brighter white than competing products. Matrix®-G is easy to use and can be cast solid, laid up by hand with chopped fiber or sprayed. Fully cured pieces can be painted, sanded, machined and polished. Matrix®-G is used to make lightweight pieces that are very strong and water-resistant. Applications include making architectural elements, reproducing sculpture and special effects. Vibrant colors are possible by adding pigments. Metal powders (bronze, pewter, brass, etc.) can be added to give the look of real metal castings at a fraction of the cost. You can duplicate the look of marble or ceramic by adding inexpensive fillers. Note: duoMatrix®-C is also available as a one component additive for concrete/GFRC (Glass Fiber Reinforced Concrete) applications.&&

Product Description
Generic	3D打印材料
Material Status	Commercial: Active
Features	Good Rigidity,Low or no water absorption,Sprayable,Machinable,Low odor
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Specific volume	0.630	cm³/g
Density	1.59	g/cm³
Water absorption rate
24hr	0.25	%

MECHANICAL	Nominal value	Unit	Test method
tensile strength	22.8 to 37.9	MPa	ASTM D638
bending strength	51.7 to 67.6	MPa	ASTM D790
compressive strength	44.8 to 65.5	MPa	ASTM D695

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	31	kJ/m²

THERMAL	Nominal value	Unit	Test method
storage stability	45 to 60	min
stripping time	90 to 120	min

Supplementary information	Nominal value	Unit	Test method
Freeze/Thaw Resistance	3.0E+2	Cycles
Mixing ratio	100 Parts Gypsum + 50 Parts C-1 Latex + 10 Parts C-2 Resin + 0.5 Parts C-3 Hardener

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.