| About |
|---|
| duoMatrix® NEO是一种未指定产品,。 它可以通过浇铸、可喷涂或手工涂敷进行加工,在北美洲、非洲和中东、拉丁美洲、欧洲或亚太地区有供货。 duoMatrix® NEO的应用领域包括添加剂/色母粒 和 样机研究。 特性包括: Flame Retardant 耐潮性&& |
| Product Description | |
|---|---|
| Generic | 3D打印材料 |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Low or no water absorption,Sprayable,Machinable,Flame Characteristics |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Specific volume | 0.630 | cm³/g | |
| Density | 1.59 | g/cm³ | |
| Water absorption rate | |||
| 24hr | 0.25 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 22.8 to 37.9 | MPa | ASTM D638 |
| bending strength | 51.7 to 67.6 | MPa | ASTM D790 |
| compressive strength | 44.8 to 65.5 | MPa | ASTM D695 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 31 | kJ/m² |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| storage stability | 6.0 | min | |
| stripping time | 60 | min |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Freeze/Thaw Resistance | 3.0E+2 | Cycles | |
| Mixing ratio | 100 Parts A (Powder |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |