| About |
|---|
| DURAFIDE® 1130A1 is a Polyphenylene Sulfide (PPS) product filled with 30% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated High Toughness&& |
| Product Description | |
|---|---|
| Supplier | Polyplastics |
| Material Status | Commercial: Active |
| Features | Ultra high toughness,V-0 |
| Availabilitys | North America,Europe,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| IMPACT | Nominal value | Unit | Test method |
| Charpy Notched Impact Strength | |||
| 23℃ | 10 | kJ/m² | ISO 179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 1.8 MPa, unannealed | 260 | ℃ | ISO 75-2/A |
| Coeff. of linear thermal expansion | |||
| TD | 4.0E-5 | 1/℃ | Internal Method |
| MD | 2.0E-5 | 1/℃ | Internal Method |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume Resistance | 3.0E+16 | ohms·cm | IEC 60093 |
| Dielectric Strength | |||
| 3 mm | 16 | kV/mm | IEC 60243-1 |
| Relative permittivity | IEC 60250 | ||
| 1 kHz | 4.00 | IEC 60250 | |
| 1 MHz | 4.00 | IEC 60250 | |
| Dissipation Factor | IEC 60250 | ||
| 1 kHz | 1.0E-3 | IEC 60250 | |
| 1 MHz | 2.0E-3 | IEC 60250 | |
| Arc Resistance | 124 | sec | |
| Compared Tracking Index | 150 | V | IEC 60112 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame Class Rating | |||
| 0.38 mm | V-0 | UL 94 | |
| 0.81 mm | V-0 | UL 94 | |
| 1.5 mm | V-0 | UL 94 | |
| 3.0 mm | V-0 | UL 94 |
| Supplementary Information | Nominal value | Unit | Test method |
|---|---|---|---|
| Color Number | HF2000/HD9050 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | 170 | MPa | ISO 527-2 |
| Tensile Strain | |||
| Broken BRK | 2.0 | % | ISO 527-2 |
| Flexural Modulus | 10000 | MPa | ISO 178 |
| Flexural Strength | 245 | MPa | ISO 178 |
| Rockwell hardness | |||
| M-level | 105 | ISO 2039-2 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.57 | g/cm³ | ISO 1183 |
| Water Absorption | |||
| 23℃，24hr | 0.030 | % | ISO 62 |
| Apparent viscosity | |||
| 310℃，1000 sec^-1 | 350000 | mPa·s | ISO 11443 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |