| About |
|---|
| Applications Functional prototypes and end-use parts that require high stiffness and/or elevated thermal resistance Typical Applications include: UAV structural components Housings and enclosures Impellers Connectors Consumer sporting goods Features High specific stiffness Elevated temperature resistance Anisotropic mechanical properties just like fiber-filled, injection molded materials Non-conductive and RF transparent Easy-to-finish surface Benefits Functional prototypes can be tested in “real life” environments Complex end-use parts can be economically manufactured in low-to-medium volumes Excels in load-bearing applications at higher temperatures Attractive surface finish&& |
| Product Description | |
|---|---|
| Generic | 3D打印材料 |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good surface appearance,Flame Characteristics,High Heat Resistance,HB |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | 3D Printing, Laser Sintering/Melting |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.20 | g/cm³ | ASTM D792 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 37 | J/m | ASTM D256 |
| Notched impact strength of cantilever beam | |||
| 23℃ | 310 | J/m | ASTM D256 |
| Drop hammer impact | 5.00 | J | ASTM D5420 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed | 184 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed | 179 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 179 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 135 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion | ASTM E831 | ||
| MD：0~50℃ | 1.4E-4 | 1/℃ | ASTM E831 |
| MD：85~145℃ | 2.7E-4 | 1/℃ | ASTM E831 |
| TD：0~50℃ | 1.0E-4 | 1/℃ | ASTM E831 |
| TD：85~145℃ | 1.8E-4 | 1/℃ | ASTM E831 |
| specific heat | 1500 | J/kg/℃ | ASTM E1269 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 5.2E+15 | ohms | ASTM D257 |
| Volume resistivity | 6.7E+15 | ohms·cm | ASTM D257 |
| Dielectric strength | 19 | kV/mm | ASTM D149 |
| Dielectric constant | |||
| 1 kHz | 3.14 | ASTM D150 | |
| Dissipation factor | |||
| 1 kHz | 0.028 | ASTM D150 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 3.00 mm | HB | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 75 | ASTM D2240 | |
| Tensile modulus | ASTM D638 | ||
| — | 5480 to 5730 | MPa | ASTM D638 |
| — | 2900 to 3000 | MPa | ASTM D638 |
| tensile strength | ASTM D638 | ||
| fracture | 48.0 to 51.0 | MPa | ASTM D638 |
| fracture | 31.0 to 34.0 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| fracture | 4.5 | % | ASTM D638 |
| fracture | 2.7 | % | ASTM D638 |
| Bending modulus | ASTM D790 | ||
| — | 4400 to 4550 | MPa | ASTM D790 |
| — | 2630 to 2830 | MPa | ASTM D790 |
| bending strength | ASTM D790 | ||
| fracture | 83.0 to 89.0 | MPa | ASTM D790 |
| fracture | 64.0 to 68.0 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Z direction |
| 3. X direction |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |