| About |
|---|
| Durable polyamide (nylon) material for real-world physical testing and functional use. Applications Complex, thin-wall ductwork Functional prototypes that approach end-use performance properties Appropriate for low-to-mid-volume rapid manufacturing Medical applications requiring USP Class VI compliance, or biocompatibility Motorsports Aerospace Housing and enclosures Impellers and connectors Consumer sporting goods Vehicle dashboards and grilles Snap-fit designs Parts requiring machining or joining with adhesives Features Excellent surface resolution and feature detail Easy-to-process Compliant with USP Class VI testing Compatible with autoclave sterilization Good chemical resistance and low moisture absorption Benefits Nicely balanced mechanical properties and processability Build prototypes that withstand functional testing Produce durable end-use parts without tooling Create accurate and repeatable parts as demanded by manufacturers Machinable and paintable for demonstration parts&& |
| Product Description | |
|---|---|
| Generic | PA Not specified |
| Material Status | Commercial: Active |
| Features | Good Electrical Properties,High elastic,noise reduction,Low contractility,Halogen free,High Heat Resistance,Good wear resistance,HB |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.00 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| 24hr | 0.070 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 32 | J/m | ASTM D256 |
| Notched impact strength of cantilever beam | |||
| 23℃ | 340 | J/m | ASTM D256 |
| Drop hammer impact | 2.70 | J | ASTM D5420 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed | 180 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 95.0 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion | |||
| MD | ASTM E831 | ||
| 0 to 50 ℃ | 8.3E-5 | cm/cm/℃ | ASTM E831 |
| 85 to 145 ℃ | 1.8E-4 | cm/cm/℃ | ASTM E831 |
| specific heat | 1640 | J/kg/℃ | ASTM E1269 |
| Thermal conductivity coefficient | 0.70 | W/m/K | ASTM E1225 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 7.0E+13 | ohms | ASTM D257 |
| Volume resistivity | 5.9E+13 | ohms·cm | ASTM D257 |
| Dielectric strength | 17 | kV/mm | ASTM D149 |
| Dielectric constant | |||
| 1 kHz | 2.73 | ASTM D150 | |
| Dissipation factor | |||
| 1 kHz | 0.044 | ASTM D150 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 73 | ASTM D2240 | |
| Tensile modulus | 1590 | MPa | ASTM D638 |
| tensile strength | |||
| limit | 43.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 14 | % | ASTM D638 |
| Bending modulus | 1390 | MPa | ASTM D790 |
| bending strength | |||
| fracture | 48.0 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |