Duramide PA66IMXHSU

About
Duramide PA66IMXHSU is an unfilled, highly impact modified Nylon with UV and heat stabilizers made for injection molding. It is available in black and natural.&&

Product Description
Generic	PA Not specified
Material Status	Commercial: Active
Features	Weather resistance is good,High impact resistance,Heat Stabilized
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.08	g/cm³	ISO 1183
Shrinkage rate
TD	1.9	%
MD	1.9	%
Water absorption rate
23℃，24hr	2.0	%	ISO 62

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2070	MPa	ISO 527-2
tensile strength
fracture	55.0	MPa	ISO 527-2
Tensile strain
fracture	50	%	ISO 527-2
Bending modulus	2200	MPa	ISO 178
bending strength	76.0	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	85	kJ/m²	ASTM D256
Impact strength of cantilever beam notch	85	kJ/m²	ISO 180
Notched impact strength of cantilever beam	无断裂		ASTM D256

THERMAL	Nominal value	Unit	Test method
Melting temperature	262	℃	DSC
Hot deformation temperature	176	℃	ISO 75-2

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.