| About |
|---|
| As an alternative to high priced, non-durable high carbon formulas, DuraSurf™ 2001 DuraJet provides a blacker, faster alternative to our standard black base, without surrendering it’s durability. The extremely high grade carbon also eliminates “bleeding” into other colors in die cut bases.&& |
| Product Description | |
|---|---|
| Generic | Ultra-high molecular weight polyethylene |
| Material Status | Commercial: Active |
| Features | Durability |
| Availabilitys | North America |
| Process Methods | sintering |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | > 0.930 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | 0.0 | g/10min | ASTM D1238 |
| Shrinkage rate | Internal Method | ||
| MD | 6.4 | % | Internal Method |
| TD | 3.1 | % | Internal Method |
| Crystallinity | 50 | % | DSC |
| Average molecular weight | |||
| — | < 4700000 | g/mol | |
| — | 3250000 | g/mol | ASTM D4020 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 720 | MPa | ASTM D638 , ISO 527-2 |
| abrasion resistance | |||
| Sand Slurry | 0.570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 无断裂 | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Linear coefficient of thermal expansion | |||
| MD | 2.0E-4 | 1/℃ | ASTM D696 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermal Response | Internal Method | ||
| Linear | < 1.0 | % | Internal Method |
| Trans. | < 1.0 | % | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |