DuraSurf™ E801

About
DuraSurf™ E801 is a high transparency HDPE extruded running surface with a molecular weight of 300,000 g/mole for silkscreen printing for ski and snowboard construction. Product Thickness Range: 0.5 mm up to 1.5 mm Product width range: 50 mm up to 750 mm Sanding: One side, standard. Two side, optional Surface Treatment: Two side standard. One side, optional.&&

Product Description
Generic	HMW-HDPE
Material Status	Commercial: Active
Features	Good Clarity
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.932	g/cm³	ASTM D1505
molecular weight	300000	g/mol

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	19.2	MPa	ASTM D638
Bending modulus	471	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.